Single wire, cable, and conduit labelling - Murrplastik Systemtechnik

Label sleeves KT (standard sleeve)
High-quality, fully transparent label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM.

Seven different sizes are available for applications ranging from 0.22 – 120 mm²
The sleeves come in different lengths

The special KT 2/20x9 or KT 2/35x9 sleeves are for multi-line single wire labelling They hold the ACS labels type KSO or DM 9...

Marker Sleeves KT (sold by the metre)
High-quality, fully transparent label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM.

Four different sizes are available for applications ranging from 0.22 – 6 mm²
The sleeves come in different lengths
Sleeve length as required

Marker Sleeves KT-B
High-quality, blue-coloured flexible label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM.

Seven different sizes are available for applications ranging from 0.22 – 120 mm²
The sleeves come in different lengths

Marker Sleeves KT-B (sold by the metre)
High-quality, blue-coloured flexible label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM.

Four different sizes are available for applications ranging from 0.22 – 6 mm²
Sleeve length as required

KTH label sleeves (halogen-free)
High-quality, fully transparent, halogen-free label sleeves for labeling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM. Seven versions are available covering the entire core cross section range from 0.22 – 50 mm². The sleeves come in different lengths.

KTH/Q label sleeves (halogen-free / high packing density)
High-quality, halogen-free two-part label sleeve for extreme demands. The geometry of the sleeve causes a minimum increase in the diameter of the cable. The trapezoidal design makes for rapid and simple installation. It serves to hold the idents (BK) and the ACS labels type KS or DM. Six versions are available covering the entire core cross section range from 0.14 – 240 mm². The sleeves come in different lengths.

Marker Sleeves KTH/Q (sold by the metre)
High-quality, halogen-free two-part label sleeve for extreme demands. The geometry of the sleeve causes a minimum increase in the diameter of the cable. The trapezoidal design makes for rapid and simple installation. It serves to hold the idents (BK) and the ACS labels type KS or DM. Six versions are available covering the entire core cross section range from 0.14 – 50 mm².

Sleeve length as required

KM label holder (standard holder)
Label holder for wire, cable and conduit labels. They hold the idents (BK) and the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties.

KM label holder (standard holder, variable length)
Individual label holder for wire, cable and conduit labels. They hold the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties. The auxiliary tool can be used to cut the label sleeve to convenient lengths for specific purposes. The tool can process materials KM 9 and KM 15 without resetting.

Marker holder KM-B
High-quality, blue-coloured flexible label holders for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties.

KMH label holder (halogen-free)
Halogen-free label holder for wire, cable and conduit labels. They hold the idents (BK) and the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties.

KMH/Q label holder (halogen-free / high packing density)
High-quality, halogen-free, two-part label sleeve for the most exacting requirements in the labelling of wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM. The label holders are fixed in place with cable ties. It matches the appearance of label sleeve KTH/Q.

Sealing plug KM
The KM sealing plug seals the KM and KMH grommets waterproof again. Using the the sealing plug enables required labelling all over the wet areas of the plant in a long-term manner. The sealing plugs are available in a wide variety of own colours in order to identify different media. Sealing plugs for KM and KMH label sleeves in 9 and 15 mm widths.

ASI-Snap marker holder
and middle of travel distance and middle of travel distance The glide rail is simply slid into the guide channel section. KS 4/... labels can be latched into the mounting clip as bus cable labelling.

Label holder KTN (halogen-free)
Halogen-free label holder for retrofit labelling of single wires and cables. They hold the idents (BK) and the ACS labels type KS or DM. The label holders are fixed in place manually. Five versions are available covering the entire core cross section range from 0.25 – 10 mm².

BK labels
Pre-inscribed murr-fix idents made from special PVC. The individual labels come on plastic strips, each containing 20 labels. BK 23: Label width 2.3 mm (A); Label height 4.0 mm (B) Font width 1.6 mm; font height 3.5 mm; black lettering BK 30: Label width 3.0 mm (A); Label height 4.0 mm (B) Font width 2.0 mm; font height 3.5 mm; black lettering BK 30:

KS label plate (single-line)
High-quality, halogen-free, universal label plate. The label plate KS 4/x is used with sleeves KT, KTH, KTHQ or holders KM, KMH, KMHQ or KTN on wires, cables, lines or conduits. The label plate is available in various lengths and colors. The large printable area at the top allows room for individual project reference, dispensing with the need to organise additional systems.

KS label plate (single-line/divisible)
High-quality, halogen-free, divisible label plate. The label plate KS 4/x is used with sleeves KT, KTH, KTHQ or holders KM, KMH, KMHQ or KTN on wires, cables, lines or conduits. The label plate is available in various colours. The divisible part of the KS 4/18-12 is used as a record of the necessary connection data. The label plate KS 4/30-70 can be cut to length in steps of 10 mm if required for labels longer than 30 mm.

KS label plate (multi-line)
High-quality, halogen-free, universal label plate. The label plate KS 15/x is mounted with the KM holders on cables, lines or conduits. The label plate is available in various lengths and colors. The large printable area at the top allows room for individual project reference, dispensing with the need to organise additional systems.

KSO label plate
High-quality, halogen-free, universal label plate for single-line and multi-line inscription. The KSO label is used with sleeves KT... or holders KM, KMH on cables, lines or conduits. The label plate is available in various lengths and colors. The large printable area at the top allows room for individual project reference, dispensing with the need to organise additional systems.

KDE label plate
ACS label plates of the KDE type are pushed directly onto single wires. The transparent KNDT cover provides additional mechanical protection for the label. The inscription can be changed at a later date by unclipping the KNDW holder without removing the wire. The KNDW holder and KNDT cover may only be used in conjunction with KDE 1 and KDE 2 label plates.

KSE label plate
ACS labels of the KSE type are pushed directly onto single wires.

KSN label plate
High-quality, halogen-free label plate for subsequent direct labelling of wires. The KSN label plate can be attached to wired single cores without disconnecting them. They can be fitted easily and quickly with the MW1 assembly tool.

BS label plate
High-quality, halogen-free label plate for single-line and multi-line inscription. The BS label plate is mounted directly with a cable tie.

KSD label plate
High-quality label plates to attach with cable ties directly onto the cables. Polycarbonate (PC) material, for labelling with Pulsar, Pictor or MVPS G3. Polypropylene (PP) material for labelling with Pulsar

ESL label plate
Self-laminating, high-quality polyester labels for single-line and multi-line inscription. The transparent extension strip sticks over the printable area and keeps the inscription clean and intact. The grid system allows direct removal of each label.